Features & Specifications
- One-piece 10-gauge floor with 2" radius corners.
- 17" side height constructed of 10-gauge material.
- Supplied with 22" front board pockets.
- Standard 22" rear board pockets providing slot for installing boards across tailgate.
- 6" side braces slanted forward 10 degrees.
- Fully boxed dirt shedding top rail with 45-degree slope.
- 10-gauge one-piece front has integrated 3⁄4 cab shield
- Interlaced I-beam cross members on 12" centers.
- 5" formed channel longitudinal of 3⁄16" material.
- Recessed shock resistant rubber mounted, FMVSS 108 clearance lights, also three cluster lights provided in lower apron; includes rear facing stop-turn-tail lights mounted at top of corner post for added visibility.
- All appearance corners have large radius bends.
- 2-part epoxy based primer.
- Full height 5" deep rear corner posts.
- 9' body weight: 2,276 lbs.
- 11' body weight: 2,549 lbs.
Tailgate Features & Specifications
- 23" vertical gate constructed of lightweight and durable aluminum with two vertical braces and fully boxed frame.
- Concealed lower latch hardware with open access to upper EZ-LATCH mechanism.
- Equipped with spreader chains and banjo eye chain holders in corner posts.
- Two-way tailgate with adjustable rod on trip lever.
- Tailgate recessed flush with rear face of corner posts.
Compatible Chassis
- Ford F-350, F-450, F-550 F-600
- RAM 3500, 4500, 5500
- Chevrolet Silverado 3500
- GMC Sierra 3500
Z-Spec for Chevrolet Medium Duty Compatibility
- Compatible with Chevrolet Silverado 4500, 5500, 6500
- 9' body weight: 2,295 lbs.
- 11' body weight: 2,570 lbs.
Value and Benefits
- Easy, one-person operation of aluminum tailgate; 132 pounds lighter than a steel tailgate.
- Reinforced body for hauling heavier loads.
- Steel floor provides greater capacity and longer life-of-body.
- Integrated tarp rail increases versatility and usefulness of body .
Aluminum Tailgate
Slammable, aluminum tailgate allows a single person to easily operate over and over each day. With greater ease to manage loads, get more done with this study, yet lightweight tailgate.
12" Centers
A more rugged body gives you more freedom to haul heavier loads. Spaced closer together than the standard 16" centers, 12" centers offer increased support and stability.
Steel Floor
Also increasing the ruggedness of the Hard Hat Package is a 7-gauge steel floor offering the opportunity to carry more weight, as opposed to the standard 10-gauge.
Integrated Tarp Rail
An integrated tarp rail provides versatility with tie-down points built into the side of the body, as well as extending the versatility of the body for a number of commercial applications and compliance with state DOT regulations.
